Release 0.14.0 inquiry

TitanFuryTitanFury Member Posts: 55
edited May 2015 in Working with GS (Mac)

Hello there!

I recently installed the RC 0.14 Gamesalad creator and it worked much better than the previous 0.13.7 release. Why isn't the newer RC considered stable?

Comments

  • GnarlyGnarly canadaMember Posts: 840

    Because it hadn't been fully tested.

  • SocksSocks London, UK.Member Posts: 12,822

    . . . and it has lots of bugs in, which is typical for this stage of development.

  • MentalDonkeyGamesMentalDonkeyGames Member Posts: 1,276

    You should consider using the 0.13.12 Release. It´s quite stable and a lot faster than 0.13.7.

    By the way, the 0.14 is a Nightly Build. The 0.13.12 is an RC.

    Mental Donkey Games
    Website - Facebook - Twitter

  • ArmellineArmelline Member, PRO Posts: 5,369

    0.13.12 is pretty much free of bugs, is very stable, and is entirely suitable for production use.

    0.14.0 is, as @NipaDidIt says, a nightly release. It is not stable, has more serious bugs, and should be used only for experimenting with new features, not for production.

    In other words, upgrade to and use 0.13.12. There's really no reason to be on an older release now.

  • HopscotchHopscotch Member, PRO Posts: 2,782

    I agree with @Armelline.

    0.13.12 is a pleasure to work with. I have worked over forty hours with it since its release with only two crashes.

  • TitanFuryTitanFury Member Posts: 55

    Alrighty then, guess I'll have to try out 0.13.12 :smile: Thanks guys!

  • gingagaminggingagaming FREELANCE GS DEV Member Posts: 1,685

    @Hopscotch said:
    I agree with Armelline.

    0.13.12 is a pleasure to work with. I have worked over forty hours with it since its release with only two crashes.

    Without closing and dumping ram? Or do you still do this as a habit? I'm still working off 0.12.20 right now which is the last stable(ish) build.

  • ArmellineArmelline Member, PRO Posts: 5,369
    edited May 2015

    @gingagaming said:
    Without closing and dumping ram? Or do you still do this as a habit? I'm still working off 0.12.20 right now which is the last stable(ish) build.

    Without closing. I get a few more crashes than @Hopscotch, but I've been doing all my work in 0.13.12, including some very large and unwieldily projects, and it's been a treat. I'd say 0.13.12 is as stable as 0.12.20, or pretty damn close, and it's noticeably faster (on Yosemite at least).

  • SocksSocks London, UK.Member Posts: 12,822

    @BigDave said:
    <- Conservative, still using 0.13.7

    You are a crazy radical, I'm still using 12.10 ! :smile:

  • ArmellineArmelline Member, PRO Posts: 5,369

    Seriously guys, at least give 0.13.12 a chance. You're just flogging yourself if you're using 0.13.7, and you're living in the past with 0.12.10 :D

  • BBEnkBBEnk Member Posts: 1,764

    I use the 13.12 RC every day working on my next project, and only issue I get is sometimes a crash on startup and a crash quite a bit when changing scene size other then that it works great.

  • gingagaminggingagaming FREELANCE GS DEV Member Posts: 1,685
    edited May 2015

    @Armelline said:
    Seriously guys, at least give 0.13.12 a chance. You're just flogging yourself if you're using 0.13.7, and you're living in the past with 0.12.10 :D

    As a 10 hour a day user of GS I have to have it running as fast as it can for client work. Ive just held off and held off and only use 0.13.7 when clients have already made the mistake of opening it up in 0.13.7. Looks like ill make the leap based on you your advice Ted. May even finally upgrade to yosemite (gulp)

    @Armelline said:
    Seriously guys, at least give 0.13.12 a chance. You're just flogging yourself if you're using 0.13.7, and you're living in the past with 0.12.10 :D

    We have all made the mistake of installing "stable" versions before testing them fully. Remember 0.12? What a mess that made of projects. These "stable" versions seem to get pushed out way too soon to be classed as "stable". There always seems to be a rush to get them out to fix the last problem. Personally I just wish they would just cap the features and make a single true stable version before moving on. If we all had a stable version, we could choose to use RC if we want an extra feature rather than a fix for the last "stable" build.

  • SocksSocks London, UK.Member Posts: 12,822
    edited May 2015

    @Armelline said:
    Seriously guys, at least give 0.13.12 a chance. You're just flogging yourself if you're using 0.13.7, and you're living in the past with 0.12.10 :D

    It's safe here in the past ! :smile: I've watched all the horror stories of wasted hours/days/weeks constantly restarting GameSalad, taking minutes to move between windows and lasers shooting out from the screen straight at your eyes (ok, I may have made that last one up) and considered myself lucky to have never experienced any of that, GameSalad has always run perfectly smoothly for me, I can't remember it crashing in weeks, perhaps months - I never upgrade any software unless it has something enticing to offer, there has been nothing enticing since 0.12.10 (for me at least), I think my next move will be for the new rendering engine in a stable 14.1 (but only after you lot have tested it for me :smile: ).

  • SocksSocks London, UK.Member Posts: 12,822
    edited May 2015

    ...

  • jonmulcahyjonmulcahy Member, Sous Chef Posts: 10,408
    edited May 2015

    I'm still using version 0.6!
    makes it difficult since save/load didn't come until 0.7, but i still like it!

  • LovejoyLovejoy Member Posts: 2,078

    12.20 all day every day.

    Fortuna Infortuna Forti Una

  • HopscotchHopscotch Member, PRO Posts: 2,782
    edited May 2015

    @gingagaming said:
    Without closing and dumping ram? Or do you still do this as a habit? I'm still working off 0.12.20 right now which is the last stable(ish) build.

    No closing and restarting, runs just fine for hours at a time. It is a fair sized project, 200+ actors and as many images. All the actors are really rule heavy.

    Especially at this phase of the project where I am jumping around, cleaning up here, tweaking there, replacing images, etc. ... makes it a pleasure to work with a stable build again.

  • gingagaminggingagaming FREELANCE GS DEV Member Posts: 1,685
    edited May 2015

    @Hopscotch said:

    Sounds like a dream! I just want to check if your running Mavericks or Yosemite before I make the change for what sounds, better!

  • HopscotchHopscotch Member, PRO Posts: 2,782

    @gingagaming said:
    Sounds like a dream! I just want to check if your running Mavericks or Yosemite before I make the change for what sounds, better!

    The first 20 hours or so were on Yosemite, without problems. Then my better half annexed that machine for some unspecified urgent matter. The last few days I have been working on Mavericks 10.9.5 on an 2011 Mac Mini. Obviously the Mac Mini is tangibly slower, but GS stays responsive over hours, so I just stuck to working on it.

  • ferzhengferzheng Member, PRO Posts: 40
    edited May 2015

    Hello guys, is there an estimated release date of the official 0.14 version?
    Thanks!!

  • BlackCloakGSBlackCloakGS Member, PRO Posts: 2,250
    edited May 2015

    About a month after the 0.13.14 release give or take a few weeks.

  • SocksSocks London, UK.Member Posts: 12,822

    @BlackCloakGS said:
    About a month after the 0.13.14 release give or take a few weeks.

    And is there an estimated release date for 0.13.14 . . .

    Answer: About a month before the 0.14 release give or take a few weeks.

    :tongue:

  • BlackCloakGSBlackCloakGS Member, PRO Posts: 2,250

    If all goes as planed :) today for 0.13.14. Thought it will be a late night release.

  • SocksSocks London, UK.Member Posts: 12,822

    @BlackCloakGS said:
    If all goes as planed :) today for 0.13.14. Thought it will be a late night release.

    Great !! :)

  • PhilipCCPhilipCC Encounter Bay, South AustraliaMember Posts: 1,390

    @BlackCloakGS said:
    If all goes as planed :) today for 0.13.14. Thought it will be a late night release.

    Oh wow! I'm still biding my time using a pencil and paper to create assets while I wait. I wonder if my iMac will start up tomorrow, better check the PRAM battery. :D

  • BlackCloakGSBlackCloakGS Member, PRO Posts: 2,250

    looks like we will be pushing the 0.13.14 release a day do to a last min bug.

Sign In or Register to comment.