Spare Code ? Dump It here.

Socks

@Armelline said:
Working on my game Ivy I had to have a leaf fall down the screen. Although some leaves will drop straight to the ground, I always expect them to sway gently from side to side when they fall. As such, leveraging LumpApps' awesome Mobinus, I thought I'd share the leaf falling solution I came up with.

A Little Falling Leaf
Requires GameSalad RC build

Very nice, but in the highly subjective world of leaf dropping I like my falling leaves to crest (or reach the peak of their swing) on their longest axis, so the leaf oscillates from tip to tip rather than rotating as it falls . . . . this is all sounding like a load of confused rambling nonsense, let me make a quick demo to show you what I mean . . . back in a second . . .

Socks

@Armelline‌

Here you go, this what I mean:

Link: https://www.mediafire.com/?lqmd376ma54r3q7

Armelline

@Socks said:
Very nice, but in the highly subjective world of leaf dropping I like my falling leaves to crest (or reach the peak of their swing) on their longest axis, so the leaf oscillates from tip to tip rather than rotating as it falls . . . . this is all sounding like a load of confused rambling nonsense, let me make a quick demo to show you what I mean . . . back in a second . . .

I tried that, but I decided it was too static feeling. I thought a bit more "randomness" to the overall feel of the movement was ultimately better, at least for my purposes. With rotation it feels more "in the wind", without the rotation it seemed too much like a feather falling. Does that make sense?

Socks

@Armelline said:
I tried that, but I decided it was too static feeling. I thought a bit more "randomness" to the overall feel of the movement was ultimately better, at least for my purposes. With rotation it feels more "in the wind", without the rotation it seemed too much like a feather falling. Does that make sense?

Yes, makes perfect sense, rotating/tumbling leaves are what you'd get in blustery/gusty weather.

I do have a secondary oscillation in each of the two constrains to introduce some pseudo-randomness, but they are turned down pretty low.

Anyhow, anyone got any feather animations they want me to interfere with ?

Hopscotch

Idle hands @Socks? Maybe you can give some optimisation tips on my repeating forward and reverse counting formula further up in the thread.

It works, but am sure it can be cleaned up.

JDuaneJ

@firemaplegames said:
Great thread!

Here is a link to download the 40 or so demos I made back in 2009/2010.

They are quite old and there are much better programmers than me, but perhaps they will help somebody out?

http://www.firemaplegames.com/downloads/GameSalad_Demos.zip

Here is a link to them on my GS profile page. The GS Safari plugin no longer works, but at least you can see their titles and know what you'll be downloading.

http://arcade.gamesalad.com/p/firemaplegames/games

Joe

Thanks! One of your demos gave me a brilliant game idea! $$$

quantumsheep

@JDuaneJ said:
Thanks! One of your demos gave me a brilliant game idea! $$$

Joe's demos are brilliant - a must download for anyone starting out or wanting to increase their knowledge

Armelline

Register touch on specific overlapping object that moves

Edit: Obsoleted by RThurman's superior intellect! See below!

RThurman

@Armelline‌ -- I may not get a chance to look at your demo for several more hours. But, In your searching did you try the example I gave in this thread a few pages back?
http://forums.gamesalad.com/discussion/comment/436263/#Comment_436263

If that file does not work for your purpose, I'd be happy to know where it falls short. (If you have time to evaluate it.)

JDuaneJ

@RThurman said:
If that file does not work for your purpose, I'd be happy to know where it falls short. (If you have time to evaluate it.)

Code don't work...Deal with it

...i'd love to know as well.

Armelline

I didn't try that one Will take a look, see if it's applicable.

Edit: Looks like it'll take a little modifying, but probably can work! Definitely a much better solution! (Is there any specific purpose to the timer?)

Edit 2: Actually can get it to work on my "tester" project, but not on my actual project. Not sure why yet Will work out if I'm doing something wrong, or if there's another factor that breaks it

Edit 3: On a side note, there is so much awesome stuff inside this thread, but 16 pages and hundreds of posts means things will get missed. Perhaps a summary of what's included should be compiled and maintained on the first post?

Edit 4: Seems to be working now, seems GameSalad got confused when I removed an attribute then added one back with the same name.

RThurman

@JDuaneJ --

@Armelline -- Hope it works out for ya!

Edit: The timer is just to slow things down a bit. It needs 1/60 of second (a pass through the frame) before everything registers correctly.

Braydon_SFX

Point and Click Tile Puzzle

Many point and click adventure games have these types of puzzles, usually to unlock a door or reveal a key. I made this as a tutorial, but thought I'd post the finished project here for all who are interested.

quantumsheep

Nice one, braydon

I helped someone out earlier with a quick introduction to animation via a table.

I'm sure it can be done better, but it works fine for me

File attached. The thread is here if you need some context for it:

http://forums.gamesalad.com/discussion/comment/461343/#Comment_461343

QS =D

Braydon_SFX

@quantumsheep said:
Nice one, braydon

I helped someone out earlier with a quick introduction to animation via a table.

I'm sure it can be done better, but it works fine for me

File attached. The thread is here if you need some context for it:

http://forums.gamesalad.com/discussion/comment/461343/#Comment_461343

QS =D

@quantumsheep‌ - Nice!

Just thought I'd point this out: You dont need the ..".png" at the end of a Change Attribute (Or Constrain) when changing an image. I'm not really sure why that caught on, or if that's how it use to work before (been too long and I dont remember) but now it's no longer needed:

quantumsheep

I think it's how it used to work before...

If it ain't broke, I'm not 'fixing' it

QS =D

tatiang

Drop-down menus

See http://forums.gamesalad.com/discussion/comment/449977/p1.

Note: This uses the Nighty build of Creator (http://gamesalad.com/previous-releases).

Edit: attached drop-down menus v9.gameproj.zip that doesn't require nightly build.
While this isn't flawless, it works pretty well and someone requested it so here it is.

JSproject

@quantumsheep said:
I think it's how it used to work before...

If it ain't broke, I'm not 'fixing' it

QS =D

If memory serves the image file extension is not needed in GS since around the introduction of IOS 5. Anyways, an advantage of not adding the extension (apart from a little bit smaller xml-files) is that you can replace png-images, that has been imported into GS, with e.g. jpg-files(*). The jpg-files will not show in the images-pane in GS but they will load fine in preview and they will load fine in ad-hoc builds. Not going into any details here as to why/when you may or may not want to do that, just a tip...

(*)via "show package content" and replacing files in the images folder

quantumsheep

I like my .pngs

BenMakesGames

Love this thread

StormyStudio

Here's a tidy bit of code for making you actors bounce into existence.

I've really tried to scale back the needed rules and attributes to the bare essentials so it's easy to reuse and add into projects.

It uses 3 self attributes on an actor,

• target height
• target width
• bouncyness

Here's a vid showing it in action and a quick run through of how to use the code/rules/script.

It's made using the Release Candidate 11.0.0.0.0.0.1. So if your using this in the future and a stable build of 11 has been released you'll need to change the project extension to .gameproj .... also hi there in the future... say hi to future me if you see me around.

Also if your interested in this you might want to check out RThurmans other bouncy scripts he shared in the Spare Code thread back on page 5. They give you a few other opitons to build on too.

JDuaneJ

@StormyStudio thanks! I've been doing this more and it really makes spawning actors/UI fun. It's nice to have a quick way to adjust the settings now. Peace

gingagaming

Apple has rejected my April Fools joke that I had planned for my April 1st release so Im not going ahead with it. So here is the template if someone wants to play with it for another year. Apples reason was that a user may think it charged their phone and was misleading! Hell Thats the April fools joke! Anyhow, April fools is a western thing so maybe our Apples friends just don't get it. Just to clarify, the MR T art and sounds cannot be used in any commercial project at all. You will be infringing rights if you do so.

JDuaneJ

Funny. Have you tried Google Play @gingagaming

gingagaming

@JDuaneJ‌ Google play will take it but I'm just not going to bother now, its just a small fish without iOS. After sending out 200 press releases I feel deflated! Hope they don't go live. lol. Maybe I will publish the google play version just for the sake of it.

JDuaneJ

Doh! Sending out PRs before an App is approved? Sux man, sorry about that. Might as well send it on through Google and publish it for a couple weeks. Meh idk.

StormyStudio

Re-written my bounce script that I shared yesterday.

Just drag and drop onto any actor and it works.

No creation of self attributes required

Instead it makes use of

self.name, for bounce percentage

self.Physics.Density for Target Width

self.Physics.Friction for Target Height

So as long as your not using Physics for your actor this is a much quicker way to simply drag a 'bounce into existence' onto any actor.

It just works.

RThurman

@StormyStudio‌ -- really nice! A very creative use of already existing self-attributes. Thanks for sharing this!

-Timo-

made this simplified joystick movement easy to understand and edit! http://www.mediafire.com/download/i2qc99oi5556nfo/simplefied_joystick.zip

Braydon_SFX

Ah this thread is finally a sticky!

EDIT: Or maybe not...